ContextCleaner: see every entry in the Windows 11 right-click menu, and which app added it — on the Microsoft Store.
Workflow WavSpec

Spotify for Authors Audiobook Audio Requirements: How to Check Every Chapter File

Published October 28, 2026 Updated October 28, 2026 8 min read

Spotify for Authors accepts audiobook audio as MP3 (192 kbps or higher, constant bit rate preferred, 44.1 kHz), WAV (44.1 kHz, 16-bit) or FLAC, with recommended RMS between -24 dB and -14 dB, a noise floor under -60 dB, 0.5 to 1 second of head time and 1 to 5 seconds of tail. Each chapter must be its own file of no more than 120 minutes, and all files must be either mono or stereo, not a mix. WavSpec checks a whole folder of chapter files against a named spec like this on your PC, corrects what can be corrected without touching the mix, and writes a report.

The numbers below come from Spotify’s own pages, checked on 28 October 2026: the Spotify for Authors Metadata and Asset Guide (its audio section is marked last updated 11/2024), the help article on uploading audiobooks and the article on troubleshooting audiobook alerts. Spotify can change them, so check those pages before a big delivery.

Check every chapter of an audiobook against a named delivery spec, on your PC.

Get it fromMicrosoft

What audio formats does Spotify for Authors accept?

The upload article says to use MP3, WAV or FLAC for audio files. The asset guide says MP3 files are preferred and gives the specs for each:

FormatSpotify for Authors spec
MP3192 kbps or higher, CBR preferred, 44.1 kHz and 16 bit
WAV44.1 kHz and 16 bit
FLACLevel 5 compression and above preferred

The troubleshooting article repeats the accepted formats in its “Unsupported audio format” alert: MP3 at 192 kbps or higher, WAV at 44.1 kHz and 16-bit, and FLAC, with the same mono or stereo configuration across all audio files.

For WAV delivery, the listed 44.1 kHz and 16-bit requirements apply to the PCM file. The guide also includes a 16-bit reference in its MP3 row, but MP3 does not have a fixed PCM bit depth in the same sense as WAV; check the encoded bitrate and sample rate rather than expecting a 16-bit MP3 property. Renaming a file does not convert it. Spotify’s separate “File type doesn’t match” alert covers cases such as a WAV file merely renamed to .mp3.

What loudness, noise floor and silence does Spotify recommend?

The asset guide lists these as recommended qualities:

CriterionSpotify for Authors guide
RMSMust be between -24 dB and -14 dB
Noise floorMust be under -60 dB
Head timeWithin 0.5 to 1 second
TailBetween 1 and 5 seconds
ChannelsMono or stereo, but not a combination of both

The guide also asks for high clarity, editing that is not distracting, no background noise or hiss, no excessive mouth noises, and audio that is not harsh, sharp or tinny. Those are listening judgments that no meter can certify, but the five rows in the table can be measured.

The guide does not state a peak ceiling in its audio section. If you also deliver the same book to another platform with a peak limit, master to the stricter spec, then confirm the Spotify numbers still hold. Our page on the ACX audiobook requirements check and the guide to Author’s Republic audio requirements cover two common second destinations.

How long can each chapter file be?

The asset guide says chapters, credits and any introductions must be standalone files no longer than 120 minutes each. If the book has no chapters, split it into segments of 30 to 120 minutes each. The troubleshooting article’s “File exceeds the maximum size” alert says the same thing in other words: a single chapter file cannot be longer than 2 hours, and the fix is to split longer chapters into separate files, such as “Chapter 8” and “Chapter 8, continued.”

Spotify also recommends naming audio files in a format similar to ISBN_track number.mp3, so the files order themselves, and notes that files appear on platforms in the order they appear on the Audio upload page.

Which files does a complete Spotify for Authors audiobook include?

The “Missing audio file” alert in the troubleshooting article gives a short checklist:

  • Every chapter has a separate audio file.
  • Opening credits and other front matter are included.
  • Closing credits and other back matter are included.

The asset guide adds that opening credits must be included and contain only the title and author and narrator names, with any other introduction, such as a preface or author’s note, in a single separate file. A retail sample is separate again, with a maximum length of 5 minutes.

Measure RMS, noise floor and room tone for a whole book in one run.

Get it fromMicrosoft

How do you check a whole audiobook before uploading?

Checking forty chapter files one at a time in an editor is where mistakes slip through. A batch check against a written spec is faster and leaves a record.

WavSpec is a Windows app for audiobook narrators and producers, audio-post editors and podcast producers who have a written spec to hit. It loads a batch of files, checks each one against a named delivery specification, corrects what can be corrected without touching the mix, re-measures every delivered file from disk, and writes a report.

  1. Create a named spec for Spotify for Authors. WavSpec ships built-in specs for ACX, Author’s Republic, Apple Podcasts, Spotify audio ads and broadcast standards, and lets you create your own named specs with fail and advisory rules. Enter the values from the table above: RMS range, noise floor, head and tail time, sample rate, bit depth and channel layout. You can save the spec as a file and share it with a client or a colleague.
  2. Drop the chapter folder on the window. WavSpec reads WAV and Broadcast Wave, RF64, AIFF, FLAC, MP3, AAC and M4A, mono or stereo.
  3. Read the results. Each criterion is marked pass, fail or advisory for each file, with a consistency line across the batch, which is where a stray stereo chapter in a mono book shows up.
  4. Correct the batch. WavSpec can apply gain to a target, convert sample rate with a windowed-sinc resampler, convert bit depth with TPDF dither, convert float to PCM, and write MP3 at a constant bit rate through the Windows encoder. For audiobook specs it also handles the head and tail: too little room tone is padded with the file’s own room tone, never synthesised noise, and too much is trimmed.
  5. Keep the report. The delivery report comes as PDF, HTML, CSV and JSON with before and after measurements and the SHA-256 digest of every delivered file. Corrected files go to a separate delivery folder; your originals are never overwritten.

Which problems can be fixed automatically and which cannot?

FindingCan WavSpec correct it?What to do
48 kHz or 24-bit WAVYes, resample and dither to 44.1 kHz 16-bitCorrect on the delivered copy
MP3 below 192 kbps or variable bit rateIt can write a CBR MP3 from your masterRe-export from the original master, not from the low-rate MP3
RMS outside -24 to -14 dBGain toward a targetCheck that peaks still behave after gain
Head or tail too short or too longYes, padded with the file’s own room tone or trimmedListen to the start and end of a few files
Noise floor above -60 dBNo, that is a recording or noise reduction issueFix in your editor, then re-check
Chapter longer than 120 minutesNoSplit at a natural pause in your editor
Mono and stereo mixed in the bookFlagged in the batchExport every file with the same layout

A note on loudness terms: Spotify’s guide uses RMS in dB, not LUFS. If you are used to LUFS targets from broadcast or podcast work, our explainer on LUFS, LKFS, dBTP and LRA explains why the numbers are not interchangeable. And if your masters are 24-bit, see when and how to dither 24-bit to 16-bit WAV.

Frequently asked questions

Does Spotify for Authors accept 24-bit WAV?

The asset guide and the troubleshooting article both list WAV at 44.1 kHz and 16-bit. Convert higher bit depths before upload, with dither.

Is there a true peak limit for Spotify audiobooks?

The audio section of the Spotify for Authors asset guide does not state one. It specifies RMS and noise floor. Follow any peak limit your other platforms require.

Can I upload one long file for the whole book?

No. Each chapter, credit and introduction must be a separate file of no more than 120 minutes, or 30 to 120 minute segments if the book has no chapters.

Does WavSpec have a built-in Spotify for Authors spec?

Its built-in Spotify spec is for audio ads. For audiobooks, create a named spec from the values on Spotify’s pages and reuse it for every title.

Is my audio uploaded anywhere?

No. WavSpec runs locally and offline, with no account, no cloud upload and no telemetry.

Try WavSpec

WavSpec is a one-time purchase with a free trial in the Microsoft Store; the listing shows the current price and system requirements. Build a Spotify for Authors spec, check the results for your next book, and resolve failures before uploading. A local report records the selected checks; Spotify still makes its own acceptance decision. More detail is on the WavSpec product page.

Review every chapter against your chosen spec, with before-and-after measurements.

Get it fromMicrosoft

Last updated 28 October 2026. Published by Automata Labs, a software company in Canada.

// release_radar

Get notified about new releases.

We build native, local-first tools for professionals who refuse SaaS fatigue. Drop your email to hear about new apps, major updates, and zero-telemetry releases as they land on the Microsoft Store. No spam — just release news.