ContextCleaner: see every entry in the Windows 11 right-click menu, and which app added it — on the Microsoft Store.
Guide BatesBind

Bates Numbering: A Practical Guide for Small Firms, Paralegals and Self-Represented Litigants

How Bates numbering works: number a folder of PDFs in one range, continue across productions, build an index, and avoid sort-order and rotated-scan errors.

Published October 28, 2026 13 min read

To Bates number a set of PDFs, put the files in the order they will be produced, choose a prefix and a fixed number of digits, and stamp every page with the next number in one continuous sequence, such as ABC000001 to ABC000250. Then make an index that lists each file with its first and last Bates number, and record where the range ended so the next production carries on from there. You can do this in Adobe Acrobat Pro, in a browser tool, or in a desktop app that numbers a whole folder at once without uploading anything.

This guide explains the format, the ways to number without Acrobat, how to keep numbering continuous across productions, how to build a production or exhibit index, and the mistakes that cause renumbering. Each section links to a deeper guide. It is general information, not legal advice: your court’s rules, any protective order and any agreement with the other side come first.

What is Bates numbering, and what does a Bates number look like?

Bates numbering gives every page in a set of documents its own unique identifier, so anyone in the case can point to an exact page. The name comes from the Bates numbering machine, a hand stamp that advanced one number each time it was pressed. Today the stamp is digital, but the idea is the same.

A typical Bates number has three parts:

PartExamplePurpose
PrefixABC or SMITH-Identifies the producing party, client or matter
Number000001The page’s place in the sequence, zero-padded to a fixed width
Suffix (optional).001Used only where a protocol calls for it

Zero padding matters. With a fixed width, every label is the same length and sorts correctly as text, so ABC000010 comes after ABC000009 rather than after ABC000001. Six digits covers up to 999,999 pages and is a common default; larger matters use seven or eight. Choose the width once for the whole matter, because changing it midway leaves two numbering styles in one case file.

Labels usually go in the bottom right corner, in a margin where they do not cover text. The full breakdown of choices is in Bates number format: prefix, padding and ranges.

How do I Bates number PDFs without Adobe Acrobat?

Acrobat Pro has a built-in Bates numbering feature, and many firms use it. It is not the only way, and it is not included in the free Acrobat Reader. The alternatives:

  1. Browser-based PDF tools. Several websites add Bates numbers to uploaded files, some free. They are convenient for a few non-sensitive pages. Before using one for discovery material, check where the files go and how long they are kept, because uploading client documents to a third party may conflict with confidentiality duties or a protective order.
  2. Other PDF editors. Some desktop PDF editors include Bates numbering or a header and footer tool that can add sequential numbers. Check that the tool can number across several files continuously, not only within one file.
  3. A dedicated desktop app. Numbering a folder in one pass, with an index, is the job dedicated tools are built for, and a local app keeps the files on your PC.

Whatever tool you use, work on copies, keep the originals unchanged, and check the first and last pages of the first and last files before you send anything. A step-by-step walkthrough is in how to Bates number PDFs without Adobe Acrobat.

How do I number a whole folder in one continuous range?

Most productions are many files, not one, and they need a single sequence that runs through all of them. The order of the files decides the order of the numbers, so most of the work is getting the order right before anything is stamped.

  1. Copy the documents into one production folder. Keep the originals elsewhere, untouched.
  2. Put the files in production order. If you are producing by custodian, date or request number, rename the files so they sort in that order, for example with a leading 001_, 002_.
  3. Check how the files sort. Some tools sort file names as plain text, which puts Exhibit 10 before Exhibit 2. Natural order sorts numbers the way people read them. Look at the list your tool shows before you number.
  4. Set the prefix, digit count and start number. For a first production, the start is usually 1.
  5. Number the set and export new files. Never overwrite the originals.
  6. Check the result. Open the first and last page of several files and confirm each file starts one number after the previous file ended.
  7. Record the last number used, so the next production starts from the next number.

If a set comes out in the wrong order, the cause is nearly always sorting. Bates numbers out of order? Fix the file sort order explains how to diagnose and fix it.

How do I continue numbers across a rolling production?

In a rolling production, documents go out in several batches over weeks or months, and numbering must carry on without gaps or overlaps.

  • Keep one numbering log for the matter. For each production, record the date, the volume name, the prefix, the first and last Bates number, and the number of pages.
  • Start each batch at the last number plus one. If the first volume ended at ABC001250, the second starts at ABC001251.
  • Keep the prefix and digit count the same, unless the parties agree otherwise.
  • Never renumber a page that has been produced. If a document needs to be replaced, the usual approach is to produce the replacement with new numbers and explain the change, following whatever the parties have agreed.

Continue Bates numbers across a rolling production covers volume naming and what to do when a batch has to be redone before it goes out.

How do I make a production index or exhibit index?

An index turns a pile of numbered pages into something a reader can navigate. Two kinds are common.

A production index travels with a discovery production. Useful columns:

ColumnExample
Begin BatesABC000001
End BatesABC000014
Page count14
File or document name2024-03-02 Invoice.pdf
Description or request numberInvoices responsive to Request 4

An exhibit index goes with a filing, a motion or a hearing binder. It lists each exhibit’s number or letter, a short description and, if the exhibits come from a production, their Bates range. Courts often have rules about exhibit labels, tabs and bookmarks, so check yours.

Whether you build the index in a spreadsheet or let a tool generate it, check the page counts against the numbers: the end number minus the begin number, plus one, should equal the page count. See how to make an exhibit index and a bookmarked exhibit PDF.

If you are representing yourself, the same principles apply on a smaller scale, and many courts publish guidance for self-represented parties. See numbering exhibits when you represent yourself.

Where do designations, slip sheets and privilege logs fit?

Bates numbers often appear alongside three other things.

Confidentiality designations. A protective order may let parties mark pages “CONFIDENTIAL” or “ATTORNEYS’ EYES ONLY”. The designation is usually stamped on each page, in a different position from the Bates number so the two do not overlap. The order itself says what each level means and who may see it. See Confidential vs Attorneys’ Eyes Only: stamping PDFs.

Slip sheets. When a document is withheld, produced in native format, or cannot be imaged, a single placeholder page takes its place in the sequence and carries its Bates number. The slip sheet says why the document is not there, so the numbering stays continuous. See what a slip sheet is in discovery.

Privilege logs. When documents are withheld as privileged, the producing party usually describes them in a log so the other side can assess the claim without seeing the contents. Logs commonly reference the Bates number of a slip sheet or the withheld range, along with the date, author, recipients and the privilege claimed. Requirements vary by court. See privilege log with Bates numbers: what to include.

Medical records for an injury claim are a common case with their own habits, such as numbering by provider. See how to Bates number medical records for a claim.

What goes wrong: sort order, rotated scans and unreadable files

Most renumbering comes from a few predictable problems.

Sort order. Files numbered in text order rather than intended order. Fix the order before numbering, and check the tool’s list.

Rotated and landscape scans. A scanned page stored sideways, or rotated by a viewer setting, can end up with its label sideways, upside down or in the wrong corner. Check landscape pages and scans in the output. See Bates numbers sideways on rotated or landscape scans.

Cropped pages. A PDF can show only part of a page (its visible area is smaller than the full page). A label placed on the full page may fall outside what anyone sees.

Labels covering content. Pages with text right to the bottom edge may need a different corner, a smaller label or a slightly reduced page, depending on what the parties accept.

Secured or password-protected PDFs. Files with security settings may refuse edits. You may need the password or an unsecured copy from the source. See Bates numbering password-protected or secured PDFs.

Unreadable or damaged files. One broken PDF can stop a batch or, worse, be skipped silently. Make sure your tool tells you which files it could not read so you can deal with them and keep the sequence accurate.

Free browser tools vs a desktop app

OptionCostGood forWatch for
Acrobat ProSubscriptionFirms already using it; Bates numbering is built inMulti-file ordering is set in its file list; check it
Browser-based toolsFree or paidA few non-sensitive filesFiles are uploaded to a third party
Other PDF editorsVariesFirms that already own oneCheck continuous numbering across files
BatesBindOne-time purchase, with a free trialA folder of PDFs numbered in one range with an index, on your PCNumbering and indexing only

For self-represented litigants and very small firms, the deciding questions are usually confidentiality (where do the files go?) and whether the tool produces an index you can hand over with the production.

How BatesBind fixes this

BatesBind numbers a folder of PDFs and writes an index page, on your PC. Open a folder, check the ranges, export.

  • One continuous range. It lists every PDF in the folder in natural order, counts the pages and assigns one continuous Bates range across the set, with the prefix, zero-padded digits and start number you choose.
  • Files it cannot read are listed with the reason and left out, so the numbering stays continuous for the rest.
  • Two export choices. One bound PDF with the index in front, or a stamped copy of each file plus a separate index PDF in a folder you pick.
  • The index lists every file with its page count and its first and last number and, in the bound PDF, the page where each file begins.
  • Labels go at the bottom right of the visible page, or another corner you choose. They stay upright on rotated and cropped scans, the typeface is embedded in the output, and existing page content is never moved.
  • Your files stay on your PC. No upload, no account, and the originals are never changed: it writes new files only and refuses to write where an original lives.

BatesBind has a free trial on the Microsoft Store, then a one-time purchase.

Get BatesBind from the Microsoft Store

Frequently asked questions

What does a Bates number look like?

Usually a prefix followed by a zero-padded number, such as ABC000001. Some protocols add a separator or a suffix.

Can I Bates number PDFs without Adobe Acrobat Pro?

Yes. Browser tools, other PDF editors and dedicated desktop apps can add Bates numbers. For confidential material, prefer a tool that keeps files on your PC.

Where should a Bates number go on the page?

Commonly the bottom right corner, in the margin, where it does not cover content. Follow any order or agreement in your case.

How do I continue numbering in a second production?

Start at the last number used plus one, with the same prefix and digit count, and keep a log of every range produced.