To preflight a PDF for print, check it against the job it is for: the page size must equal the trim size plus any bleed, every font must be embedded, images must have enough effective resolution at the size they are placed, colour must be in the space the printer asks for, and text must sit inside the safe area. Then check the press-specific details: total ink coverage, rich black, very thin lines and white objects set to overprint. A file can pass every general check and still fail because it does not fit the job, which is why a preflight always starts from the printer’s or platform’s specification.
This guide explains each check in plain terms, how to do it with free or paid tools on Windows, and what changes for KDP, IngramSpark, Canva files, EPUBs and Word manuscripts. Each section links to a deeper guide.
What does preflight mean, and what makes a PDF print-ready?
Preflight is the check a file gets before it goes to press, named after a pilot’s pre-flight checklist. Print shops run one on every job they receive; doing your own first saves a round of rejected files.
“Print-ready” is not a single standard. It means ready for this printer, this product and this paper. Typical requirements:
- Size: page size equals trim size, plus bleed on each edge if anything prints to the edge.
- Fonts: all embedded (or converted to outlines in artwork).
- Images: enough effective resolution for the printing method, commonly 300 ppi for offset and many digital presses.
- Colour: CMYK, spot colours or RGB as the printer specifies, often with an output intent.
- Layout: text and important artwork inside the safe area, nothing critical in the gutter.
- Clean file: no printable comments or form fields, no security settings that block processing, and a PDF standard the printer accepts.
For a checklist you can print out, see how to tell if a PDF is print-ready. If you are choosing an export setting, PDF/X-1a vs PDF/X-4 explains the difference: PDF/X-1a flattens transparency and allows only CMYK, greyscale and spot colour, while PDF/X-4 keeps live transparency and allows colour-managed RGB with an output intent.
How do I check fonts, image resolution and colour space?
Fonts. In any PDF reader, open File > Properties > Fonts (in Adobe Acrobat Reader, it is the Fonts tab of Document Properties). Each font should say “Embedded” or “Embedded Subset”. A font without that label will be substituted at the printer, which changes line breaks and can drop characters.
Image resolution. What matters is effective resolution: the image’s pixels divided by the size it is placed at. A photo 1,200 pixels wide placed 4 inches wide has 300 effective ppi. Enlarge it to 8 inches and it drops to 150. The “72 ppi” in an image’s metadata means nothing on its own. Read what effective ppi is for the full explanation and how to find it.
Colour space. A file meant for CMYK printing may still contain RGB images, RGB vector colours from a web palette, or spot colours that should have been converted. Each can print differently from what you saw on screen. Paid tools such as Acrobat Pro’s Output Preview show the colour spaces and separations in a file; free readers generally do not.
How do I check bleed, trim, safe area, gutter and spine?
These are geometry checks, and they are where many files fail.
- Trim is the final cut size. In the PDF it is recorded as the TrimBox.
- Bleed is extra image beyond the trim so a slightly off cut does not leave a white edge. A common amount is 0.125 inch (3 mm) per edge, but use the printer’s figure. The page or BleedBox should be the trim plus bleed on each edge.
- Safe area is a margin inside the trim where text and important artwork belong, because the cut can drift inward too.
- Gutter is the inside margin of a bound book. It needs to be wider than the outside margin, and the minimum usually grows with page count.
- Spine width on a book cover depends on the page count and paper. Spine text has to fit inside it with room to spare.
To check bleed by eye, zoom to a page corner: background colour or images should run past the trim. To check the safe area, measure from the trim to the nearest text. Covers have their own rules for the barcode area; see KDP paperback cover spine width, spine text and barcode.
What are ink limit, rich black, hairlines and white overprint?
These four are press problems: the file looks fine on screen but prints badly.
Total ink limit (TAC). The total percentage of cyan, magenta, yellow and black at any point. Too much ink on paper causes smearing, set-off and slow drying. Limits vary by press and paper, from around 240 percent on some uncoated stocks to 300 percent or more on coated. Total ink limit: 240 vs 300 vs 320 percent explains where each comes from.
Rich black. Large black areas printed with black ink alone can look grey. A rich black adds some cyan, magenta and yellow under the black. Small text should normally be black only, because four inks on fine type show any slight misregistration as coloured fringes.
Hairlines. Lines too thin to hold on press may break up or vanish. Printers and platforms set a minimum line weight, so check yours. KDP, for example, states a minimum in its manuscript guidelines.
White overprint. An object set to overprint lets inks underneath show through. For a white object, that means it disappears entirely on press, even though it looks fine on screen. It is a classic hidden error in logos and text.
All four are covered in rich black, hairlines and white overprint in PDFs. A related surprise is comments: some PDF annotations are set to print. See will PDF comments and annotations print?
How do I check a KDP, IngramSpark or Canva file?
KDP paperback. Amazon’s help pages set the rules for interiors and covers: trim size, bleed, margins by page count, minimum font size and line weight, fonts embedded and no crop marks or comments in the interior. KDP’s own previewer has the final word, but catching problems before upload saves a round trip. Walkthroughs: check a KDP paperback PDF before upload and KDP paperback cover spine width and barcode.
IngramSpark. IngramSpark publishes its own file requirements for interiors and covers, which differ from KDP’s in places. If you publish on both, check each file against each platform’s guide rather than assuming one file fits both. See IngramSpark PDF requirements: pre-upload check.
Canva. Download with the PDF Print option and turn on crop marks and bleed when the printer needs bleed. Canva designs often use RGB colours and web images, so check colour and image resolution afterwards, and make sure your background actually extends into the bleed. See check a Canva PDF before sending it to a printer.
How do I check an EPUB or a Word manuscript before upload?
EPUB. The standard free validator is EPUBCheck, a W3C project maintained by the DAISY Consortium. It reports structural errors by code; RSC-007, RSC-008 and RSC-012 are common ones that point to missing resources and broken links. See EPUBCheck RSC-007, RSC-008 and RSC-012. Beyond validation, check the cover, the table of contents and alt text for images. Store-specific notes are in checking an EPUB before uploading to KDP, Apple Books or Kobo.
Word manuscript. Before uploading a .docx or converting it to PDF:
- Set the page size to your trim size in Layout > Size.
- Set margins, with mirror margins and a gutter for print books.
- Accept or reject all tracked changes and delete comments (Review tab).
- Check that images are high enough resolution for their printed size.
See check a Word manuscript before uploading to KDP.
ISBN. An ISBN-13 ends in a check digit calculated from the other twelve. A typo in one digit usually breaks it, which makes it a quick sanity check before metadata goes in. See ISBN check digit explained.
What is a quick preflight routine I can run on any file?
When you do not have a dedicated checker to hand, this routine catches most of the problems that get files rejected. It takes about ten minutes for a short job.
- Get the specification first. Ask the printer or read the platform’s guide: trim size, bleed, safe area, colour space, ink limit and accepted PDF standard. Write the numbers down.
- Check the page size. In your PDF reader’s document properties, compare the page size with trim plus bleed. A business card with 0.125 inch bleed on a 3.5 × 2 inch trim should measure 3.75 × 2.25 inches.
- Check the fonts. Every font in the Fonts tab should be embedded or an embedded subset.
- Check the images. For each important photo, divide its pixel width by its placed width in inches. Anything well under the printer’s minimum needs a better source image.
- Look at the edges. Zoom to each corner and edge. Background art should run past the trim, and no text should sit close to it.
- Look at the gutter and spine on books. Text near the inside margin and spine text that is too wide for the spine are both common rejections.
- Search for hidden extras. Open the comments panel and remove anything printable, and check that form fields and security settings are not present.
- Export again if anything changed, then check the new file, not the old one.
What this routine cannot see without better tools is colour: hidden RGB objects, total ink coverage, rich black builds and overprint settings. Those need a reader with separation preview or a dedicated preflight tool.
Free and paid preflight checkers: what each one covers
| Option | Cost | What it covers |
|---|---|---|
| Your PDF reader’s document properties | Free | Page size, fonts embedded, security |
| KDP and IngramSpark previewers | Free with an account | Their own rules, after upload |
| EPUBCheck | Free | EPUB structure and links |
| Adobe Acrobat Pro Preflight | Subscription | Extensive profiles, fixups, Output Preview |
| Dedicated preflight tools (such as Enfocus PitStop and callas pdfToolbox) | Paid | Production workflows in print shops |
| ProofSlip | Paid, with a free trial | Job-based checks for PDFs, EPUBs and Word files on Windows |
You can do a lot for free, as preflighting a PDF without expensive software shows. For a direct comparison with the industry standard, see ProofSlip vs Acrobat Pro Preflight for print shops.
How ProofSlip fixes this
ProofSlip checks print PDFs, EPUBs and Word manuscripts on your PC and says, in plain language, what to fix before you send them.
- Check against the job. Pick a job preset, from business cards to book interiors and paperback covers. Size, bleed, spine, safe area, gutter, page count and colour are judged against it, and any failing finding makes the verdict FAIL.
- See where the problem is. Select a finding to see its page, with the problem boxed and the trim and safe area drawn in. The HTML report pictures up to six of them.
- In a PDF: fonts, image resolution, colour spaces and the plates the file needs; text near the trim or gutter, spine text and the barcode area; hairlines, white overprint, transparency and printable comments; and, depending on the preset, small text, rich black text and the ink limit on text and vector colours (images are not measured for ink).
- EPUB: package and navigation, broken links, missing alt text, cover and accessibility details.
- Word (.docx): page size and margins against your trim, tracked changes, comments and low-resolution images.
- Book details: ISBN check digits, categories and keywords, and the title and ISBN compared with your EPUB.
- Many files at once. Drop up to 200 files on the window, check them against one preset, and export every report at once, with your name and logo.
- Private by design. No account and no upload. Files never leave your PC and are never changed.
ProofSlip has a free trial on the Microsoft Store, then a one-time purchase.
Get ProofSlip from the Microsoft Store
Frequently asked questions
What resolution should images be for print?
300 effective ppi at the placed size is the common guideline for offset and many digital presses. Effective resolution depends on how large the image is placed, not on the ppi number in its metadata.
How much bleed does a print PDF need?
Commonly 0.125 inch (3 mm) on each edge that prints to the edge, but use the figure your printer or platform specifies.
Should I export PDF/X-1a or PDF/X-4?
Use what your printer asks for. PDF/X-1a flattens transparency and allows only CMYK, greyscale and spot colour; PDF/X-4 keeps live transparency and allows colour-managed RGB.
Why did a white object disappear when printed?
It was most likely set to overprint. A white object set to overprint lets the inks under it show through, so it vanishes on press.
More guides in this topic
- How to tell if a PDF is print-ready: a checklist
- PDF/X-1a vs PDF/X-4: which should you export for print?
- What is effective PPI? Why 72 ppi images fail in print
- Total ink limit (TAC): 240 vs 300 vs 320 percent
- Rich black, hairlines and white overprint in PDFs
- Will PDF comments and annotations print?
- Check a KDP paperback PDF before you upload it
- KDP paperback cover: spine width, spine text, barcode
- IngramSpark PDF requirements: pre-upload check
- Check a Canva PDF before sending it to a printer
- Check an EPUB before uploading to KDP, Apple or Kobo
- EPUBCheck RSC-007, RSC-008, RSC-012: fix broken links
- Check a Word manuscript before uploading to KDP
- ISBN check digit explained
- How to preflight a PDF for print without expensive software
- ProofSlip vs Acrobat Pro Preflight for print shops
- All ProofSlip topics