ContextCleaner: see every entry in the Windows 11 right-click menu, and which app added it — on the Microsoft Store.
Guide MeasureSet

PDF Takeoff for Flooring, Paint, Drywall and Concrete: Measuring Plans to Scale and Turning Them Into Order Quantities

How to do a takeoff from PDF plans: set and check the scale, measure rooms and openings, and convert to cartons, gallons, sheets or cubic yards.

Published October 28, 2026 14 min read

A PDF takeoff is a list of measured quantities taken from a set of plans: areas, lengths and counts, turned into what you need to order. To do one, set the drawing’s scale and check it against a printed dimension, measure each room’s floor area, perimeter and wall area, deduct openings, then divide by what one unit of material covers and add a waste factor. Rounded up, that gives you cartons of flooring, gallons of paint, sheets of drywall or cubic yards of concrete.

This guide walks through each stage for small contractors and estimators working on Windows, with the formulas, the checks that catch mistakes, and links to deeper guides for each trade.

What is a takeoff, and what do I need to do one from PDF plans?

A takeoff (sometimes “quantity takeoff”) measures the work shown on drawings so you can price a bid and order materials. It answers questions like “how many square feet of floor”, “how many linear feet of base” and “how many doors”.

To do one from PDFs you need:

  • The right sheets. Floor plans for areas and perimeters, finish schedules for which material goes where, reflected ceiling plans for ceilings, sections and elevations for wall heights.
  • A vector PDF if you can get one. A PDF exported from CAD keeps lines sharp and often lets software snap to walls. A scanned PDF is an image and needs more care with scale.
  • The drawing scale, printed in each view’s title or the sheet’s title block.
  • Your coverage figures: square feet per carton, square feet per gallon, sheet sizes, and so on, from the product data sheets you plan to buy against.

A step-by-step first pass is in how to do a takeoff from a PDF plan.

How do I set and check the scale on a PDF drawing?

Scale is where most takeoff errors start, because a PDF can be printed, rescaled or scanned in ways that silently change it.

  1. Read the stated scale. Common architectural scales are 1/4” = 1’-0” (1:48) and 1/8” = 1’-0” (1:96). Metric drawings often use 1:50 or 1:100. Note that different views on the same sheet can use different scales, so check the label under each detail.
  2. Calibrate against a dimension. Pick the longest dimension string you can find, measure it with your tool, and compare. A long dimension reduces the effect of a small click error.
  3. Check a second dimension in the other direction. If horizontal checks out and vertical does not, the PDF was stretched during scanning.
  4. Prefer the graphic scale bar if the drawing has one. A bar scale stays correct when a sheet is resized, while a written scale only holds at the original paper size.

Watch for sheets marked “not to scale” or “NTS”, and for PDFs printed with “fit to page”, which shrinks everything by an unknown amount. When the printed scale and the dimensions disagree, trust the dimensions and tell whoever sent the plans. Our guide to setting the scale on a PDF drawing and checking it covers each case.

How do I measure rooms, lengths, counts and openings?

Measure each quantity the way the material is bought and installed.

MeasurementUse it forHow to measure
Floor areaFlooring, underlayment, coatings, slabsInside face of walls, room by room
PerimeterBaseboard, cove, wall areaAround the room, less door openings for base
Wall areaPaint, drywall, wall tilePerimeter times wall height, less openings
LengthTrim, transitions, edgingPolyline along the run
CountDoors, fixtures, outlets, thresholdsOne click per item

A few habits keep a takeoff checkable:

  • Measure room by room, named the way the plan names them, rather than one big polygon. Rooms make it easy to price changes and to check your work against a finish schedule.
  • Deduct openings explicitly. Subtract doors from baseboard runs and doors and windows from wall area, and keep the deductions visible so someone else can see what you did.
  • Measure to the right face. Where walls are drawn as two lines, flooring is measured to the inside face, while framing quantities may follow the centreline.

Two trade-specific walkthroughs: baseboard linear feet from a floor plan PDF and calculating flooring square footage from plans.

How do I turn square feet into cartons, gallons, sheets or cubic yards?

The pattern is always the same: measured quantity, times one plus waste, divided by what one unit covers, rounded up to a whole unit.

Flooring cartons. Cartons = area × (1 + waste) ÷ square feet per carton. For example, a 412 sq ft room with a 10 percent waste factor needs 453.2 sq ft; at 20 sq ft per carton that is 22.66, so you order 23 cartons. More in how many boxes of flooring to order.

Carpet. Carpet comes off rolls, commonly 12 feet wide, so the order depends on how strips and seams lay out in the room, not only on area. See carpet on 12-foot rolls, strips and seams.

Paint gallons. Gallons = wall area × number of coats ÷ coverage per gallon, using the coverage on the product data sheet for the surface you are painting. Do ceilings as a separate line. Walkthrough: estimating paint gallons from a floor plan PDF.

Floor coatings. Epoxy and similar coatings are sold by kit or gallon with a stated coverage per coat that depends on film thickness. See epoxy floor coating gallons from a floor plan.

Drywall sheets. Sheets = surface area ÷ sheet area. A 4 × 8 sheet covers 32 sq ft and a 4 × 12 sheet covers 48 sq ft. Add waste, then round up, and count ceilings separately if they use a different board.

Concrete cubic yards. Cubic yards = length (ft) × width (ft) × thickness (ft) ÷ 27. Convert thickness from inches by dividing by 12. A 20 × 30 ft slab at 4 inches is 20 × 30 × 0.333 = 200 cubic feet, or about 7.4 cubic yards before any allowance. More in concrete cubic yards from PDF plans.

Bagged products. Thinset, grout and self-leveling underlayment are bought by the bag, with coverage that depends on trowel size or pour depth. The manufacturer’s bag or data sheet gives the figure. See how many bags of thinset for tile and how many bags of self-leveler from a floor plan.

A worked example: one room, three trades

Here is one bedroom taken off for flooring, base and paint, to show how the numbers chain together. The coverage figures below are examples only; use the ones on your product’s data sheet.

  • Room: 12 × 14 ft, 8 ft ceiling, one 3 ft wide door (6 ft 8 in tall), one 3 × 4 ft window.
  • Floor area: 12 × 14 = 168 sq ft. With a 10 percent waste factor, 184.8 sq ft. At an example 20 sq ft per carton, 9.24 cartons, so order 10.
  • Perimeter: 2 × (12 + 14) = 52 ft. Less the 3 ft door opening, 49 linear feet of base before waste.
  • Wall area: 52 × 8 = 416 sq ft. Less the door (about 20 sq ft) and window (12 sq ft), 384 sq ft. Two coats is 768 sq ft. At an example coverage of 350 sq ft per gallon, 2.2 gallons, so 3 gallons, or one 2-gallon purchase plus a quart if the product comes that way.

Laid out like this, every number can be traced back to a measurement, which is what makes a takeoff easy to check and easy to revise.

What waste factor should I add for each trade?

There is no single right number, and a factor copied from someone else’s job can be badly wrong for yours. Waste depends on:

  • Layout and pattern. Straight lay wastes less than diagonal, herringbone or patterned layouts.
  • Room shape. Many small rooms, closets and angles produce more offcuts than one large rectangle.
  • Material size. Large-format tile and wide plank produce bigger offcuts per cut.
  • Attic stock. Some clients or specifications ask for extra material to be left on site for future repairs.
  • Pack size. Rounding up to whole cartons or bags already adds some margin.

Start with the manufacturer’s and supplier’s guidance, adjust for the layout, and record the factor on each line of the takeoff so it can be reviewed. Over time, comparing what you ordered with what was left over is the best way to tune your own factors.

How do I get a room schedule into Excel?

A room schedule lists each room with its measured quantities: floor area, perimeter, wall area and the material assigned to it. Building one in a spreadsheet makes the bid easy to price and easy to revise.

Set up columns like these:

RoomFloor areaPerimeterWall heightWall areaMaterialUnits to orderUnit priceLine total

Leave the price columns blank until you get supplier quotes. If you measure in a tool that exports CSV, Excel opens it directly; check that numbers arrive as numbers, not text, before you add formulas. Use the room names from the plan so the schedule matches the drawings and the finish schedule.

How do I handle a revised plan set?

Revisions are where takeoffs go stale without anyone noticing.

  1. Check the revision block on each sheet and look for revision clouds and deltas, which mark what changed.
  2. Compare the old and new sheets with an overlay if you can. Overlay comparison shows removed and added linework in different colours, which catches changes that were never clouded.
  3. Re-measure only what changed, but re-check the scale on every new sheet; a reissued set can come at a different paper size.
  4. Keep both takeoffs and note the revision each quantity came from, so a change order can be priced from the difference.

Which takeoff software fits a small contractor: one-time or subscription?

You can do a takeoff with a printed set and a scale ruler, and plenty of estimators still do for small jobs. Software saves time when plans arrive as PDFs and revisions are frequent.

OptionPricing modelFits
Printed plans and a scale rulerFreeSmall jobs, quick checks
PDF readers with measure toolsFree or included with a PDF editorOccasional measurements, no order quantities
Bluebeam RevuSubscription in current versionsFirms that also mark up and coordinate drawings
PlanSwift, On-Screen Takeoff and similarVaries by vendorDedicated estimators with large plan sets
MeasureSetOne-time purchaseFlooring, paint, drywall and concrete takeoffs on one PC

If you are weighing a change, see Bluebeam Revu 20 end of life and the options and a one-time purchase PlanSwift alternative. Check each vendor’s current pricing and licence terms before you commit.

How MeasureSet fixes this

MeasureSet is PDF takeoff for flooring, paint, drywall and concrete bids, on your PC, with totals that show what to order.

  • Measure. Click inside a room to measure it wall to wall, even where walls are drawn as two lines. Draw lengths, areas, counts and segments, and deduct openings.
  • Scale. MeasureSet reads the printed scale and offers it, and points snap to walls and lines.
  • Order. Give a label a unit and what one unit covers, and the totals show cartons, gallons, sheets or cubic yards. Trade labels adds starter labels for four trades.
  • Rooms. Room names are read from the plan and Excel gets a room schedule. A wall height gives a room’s wall area.
  • Share. Export Excel with blank price columns, .csv, and a marked-up PDF with the totals.
  • Revisions. Compare a revision in red and blue.
  • Your files. No account and no upload, and your plan PDFs are never written over.

MeasureSet has a free trial on the Microsoft Store, then a one-time purchase.

Get MeasureSet from the Microsoft Store

Frequently asked questions

How do I know the scale on a PDF plan is right?

Measure a long printed dimension with your tool and compare. If it does not match, the PDF was resized or scanned; calibrate from the dimension, check a second one in the other direction, and use the bar scale if there is one.

How do I calculate cubic yards of concrete from a plan?

Multiply length by width in feet, multiply by thickness in feet (inches divided by 12), and divide by 27.

Should waste be added before or after rounding to whole cartons?

Before. Multiply the measured area by one plus the waste factor, divide by the coverage per carton, then round up.

Do I need a vector PDF for a takeoff?

No, but it helps. A vector PDF keeps lines sharp and lets tools snap to walls. A scanned PDF works if you calibrate the scale carefully.