To find exactly what changed between two revisions of a drawing set, match each sheet in the new set to the same sheet number in the old set, align each pair so the drawings sit on top of each other, and compare them visually, with an overlay that shows removed linework in one colour and added linework in another. Then record every change you find in a list that estimators and the field can act on. Revision clouds help you start, but they only show what the drafter chose to flag, so a full comparison is the only way to catch everything.
This guide covers why revisions need comparing, how sheets are matched, what clouds and delta tags miss, which comparison view to use, how to handle scans and CAD plots, how to document changes, and which tools do the job. Each section links to a deeper guide on this site.
Why do drawing revisions need comparing, and what usually changes?
Drawings change throughout a project: addenda during bidding, bulletins and supplemental instructions after award, permit corrections, shop drawing resubmittals and, at the end, record drawings. Each reissue can change quantities, scope, coordination or cost, and anyone working from the old sheet is working from wrong information.
Typical changes include:
- Dimensions and levels, such as a wall moving 100 mm or a slab elevation changing.
- Notes and specifications called out on the sheet, such as a member size going from 2x6 to 2x8.
- Added or deleted elements: doors, fixtures, equipment, openings.
- Rearranged details or new detail references.
- Sheets added to or removed from the set.
Bid day is where a missed change hurts most. The addendum drawing review checklist for bid day covers what to check in a short window, and what an ASI is and how to check the revised sheets it brings covers changes issued after award. A conformed set folds every addendum into the bid set, and it too should be checked against the addenda it claims to include.
How are sheets matched between two sets?
Before you can compare, each sheet in the later set needs its partner in the earlier set. Page order is not reliable: a sheet inserted early in the set shifts every page after it.
The dependable key is the sheet number in the title block, such as A-101 or S-201. Matching works like this:
- Read the sheet number on every page of both sets. In a PDF with a text layer, the number can be read directly. In scans and many CAD plots, it has to be read from the image.
- Pair pages with the same sheet number.
- List the unmatched sheets. A sheet number found only in the later set is new; one found only in the earlier set has been removed or renumbered.
- Fix renumbered sheets by hand. If A-104 became A-105, pair them manually so the comparison runs.
Renumbered and split sheets are where automated matching most needs a human check. The full sheet-by-sheet process is in how to compare two drawing revisions, sheet by sheet.
What do revision clouds and delta tags tell you, and what do they miss?
A revision cloud is the scalloped outline around a change. A delta tag, a triangle holding a revision number or letter, sits beside it and points to a line in the revision block in the title block. Together they tell you where the drafter says something changed. Revision clouds and delta tags explained covers the conventions.
They are useful, but they are drawn by hand after the edit, so they can miss:
- Changes the drafter forgot to cloud.
- Changes the drafter considered too small to flag, such as a note edit.
- Knock-on changes in other sheets, such as a door moved on a plan but not on the matching elevation.
- Changes made in a referenced file that updated several sheets at once.
Treat clouds as a starting point. The same is true of a cover letter or a narrative that lists changes: it says what the author intended to change, not what is actually on the sheet. Shop drawing resubmittals are a common place for unflagged changes, covered in shop drawing resubmittal: find unflagged changes, and permit resubmittals are covered in find every change in a permit plan resubmittal.
Overlay, blink or side by side: which comparison view to use
Once a pair is aligned, three views are common, and each suits different work.
| View | How it works | Best for |
|---|---|---|
| Overlay | Both sheets drawn on top of each other; linework only in the earlier sheet in one colour, only in the later sheet in another, unchanged in a neutral colour | Seeing every change on a sheet at a glance |
| Blink | The view switches back and forth between the two sheets | Spotting small moves and shifts that are hard to see in colour |
| Side by side | The two sheets shown next to each other, panned and zoomed together | Reading notes, schedules and dense areas |
Overlay is the fastest way to find changes, blink is the best way to confirm a small move, and side by side is the best way to read what a changed note now says. Most reviewers switch between them.
Alignment is the hidden requirement for all three. If one sheet is shifted, rotated or scaled slightly, an overlay shows false changes everywhere. Good tools align each pair before comparing.
How do I compare scanned sets and CAD plots without a text layer?
Not every set is a clean vector PDF. Scans of paper sets, PDFs from some CAD plotters, and image files have no text the computer can read, and they introduce small distortions.
Three things matter:
- Reading the sheet number. Without a text layer, the title block has to be read with text recognition (OCR) before sheets can be matched.
- Correcting distortion. Scanners and plotters can stretch a sheet slightly in one direction or skew it. A simple shift-and-rotate alignment is not enough; local correction makes the two images line up across the whole sheet.
- Ignoring noise. Scan speckle and line-weight differences show up as changes. A sensitivity setting, and a mask over areas such as the title block date, keeps the result readable.
Compare a scanned drawing with a CAD PDF covers this in detail. For record drawings, the comparison often runs between marked-up field sets and the issued record set; see check record drawings against as-built redlines.
How do I document changes for estimators and the field?
Finding a change is half the job. The other half is telling the right people in a form they can use.
- A changed-sheet list. Which sheets changed, which are new, which were removed. This is what a project manager reads first.
- A change log. One line per change: sheet, location, what changed and who needs to know. Estimators use it to reprice, and it is easy to keep as a spreadsheet.
- Clouded sheets for the field. The later sheets with a cloud around every change you found, including the ones the drafter did not cloud.
- A record of what you compared. File names, dates and, ideally, a hash of each input file, so it is clear later which versions you checked.
A simple change log might look like this:
| Sheet | Location | Change | Affects |
|---|---|---|---|
| A-101 | Grid C/4 | Door D12 moved 600 mm east | Framing, electrical |
| S-201 | Beam B3 | Size changed in note | Steel order |
| M-301 | Not clouded | Duct route revised | Mechanical sub |
The “Not clouded” entry is the reason to compare: it is a change the drafter did not flag, and it would otherwise reach the field unnoticed.
For questions that come out of the comparison, such as a change that conflicts with another sheet, an RFI is the usual route. Keep the change log alongside it, and file the comparison record with the set it describes so anyone can see later which versions were checked and when.
Which tools compare drawings, and what do they cost?
| Tool | Cost model | Strengths | Limits for this job |
|---|---|---|---|
| Bluebeam Revu | Subscription | Overlay Pages and Compare Documents, included in the Core plan and above | A full markup suite, more than you need if comparison is the only job |
| Adobe Acrobat Pro Compare Files | Subscription | Built into Acrobat; a scanned documents and drawings mode compares pages as images | Compares two files at a time; workable for a single drawing |
| AutoCAD DWG Compare | Subscription | Compares native DWG files | Needs the DWG files, which consultants often do not send |
| Image editor difference blend | Varies | Free or low cost; works on any two images | Manual alignment, one sheet at a time |
| Drawing Revision Delta | One-time purchase, with a free trial | Whole sets matched by sheet number, aligned and ranked by amount of change | Windows 11 only; compares, does not edit drawings |
DrawDiff is a free browser tool for a quick overlay of two PDF pages, and it runs without uploading. Another free option: put two sheet images on separate layers in an image editor and set the top layer’s blend mode to difference, so unchanged areas go dark. It works for one sheet but takes time across a set. See Photoshop difference mode vs Drawing Revision Delta.
Fair head-to-head comparisons: Acrobat Compare Files vs Drawing Revision Delta, Bluebeam overlay compare alternative, no subscription and AutoCAD DWG Compare vs PDF drawing set compare.
How Drawing Revision Delta fixes this
Drawing Revision Delta tells you which sheets changed and where, on your own PC.
- Whole sets in. Pick a folder or files for each revision. PDFs, scanned TIFFs and other images are accepted, and multi-page files are split into sheets.
- Sheets matched by sheet number from the title block. When there is no text layer, it reads the title block with the text recognition built into Windows. You can correct any pair by hand. New and missing sheets are listed.
- Alignment. Each pair is aligned for shift, rotation and scale, then corrected locally for the slight stretch plotters and scanners introduce.
- Ranked results. The Pairs table shows how much of each sheet changed and puts the most changed sheets first.
- Three views. Overlay (red only in the earlier revision, blue only in the later), Blink or Side by side, with revision clouds around each change. Where both PDFs have text, changed words are listed, such as 2x6 to 2x8. A mask over the title block ignores date and revision-letter edits.
- Exports. The later sheets with a cloud around every change as PDF markups; a PDF change report with a SHA-256 hash of every input file; CSV sheet summary and change list; PNG snapshots.
- Private. No account, no sign-in, no telemetry and no ads. It reads only the files and folders you pick.
Good to know: it runs on Windows 11.
Drawing Revision Delta has a free trial on the Microsoft Store, then a one-time purchase.
Get Drawing Revision Delta from the Microsoft Store
Frequently asked questions
Can I rely on revision clouds to find every change?
No. Clouds are drawn by hand and show what the drafter chose to flag. Compare the sheets to find unflagged changes.
How are sheets matched if pages are in a different order?
By the sheet number in the title block, not by page position. New, removed and renumbered sheets need a check.
Can I compare a scanned set with a CAD PDF?
Yes, if the tool can read the title block with OCR and correct for scanner stretch. Expect some noise from scan quality.
Is there a free way to compare two drawings?
Yes. Layer two sheet images in an image editor with a difference blend. It works for single sheets but is slow across a whole set.
More guides in this topic
- How to compare two drawing revisions, sheet by sheet
- Revision clouds and delta tags explained
- Addendum drawing review checklist for bid day
- What is an ASI? Check the revised sheets it brings
- What is a conformed set? Check it against addenda
- Shop drawing resubmittal: find unflagged changes
- Find every change in a permit plan resubmittal
- Compare a scanned drawing with a CAD PDF
- Check record drawings against as-built redlines
- Acrobat Compare Files vs Drawing Revision Delta
- Bluebeam overlay compare alternative, no subscription
- AutoCAD DWG Compare vs PDF drawing set compare
- Photoshop difference mode vs Drawing Revision Delta
- All Drawing Revision Delta topics